Bypass Quick Key Voice Channel Access |
(Trunking Wide, General) |
When enabled, the Quick Key feature
is disabled (bypassed)
for group voice calls. Therefore, upon receiving a Voice Channel access
grant to a Dispatch Voice channel request, and
the PTT button is no longer pressed,
the radio ends the request sequence and returns to the idle state. This
selection applies for all Trunking
Systems and therefore to all Trunking
Personalities.
When disabled, the Quick Key feature
is enabled during
group voice calls.
 |
Since, especially in a busy condition, a significant amount of time may pass between the initial PTT button-press that sends a Dispatch Voice request to the Trunking System and receipt of the Voice Channel access grant that allocates a voice channel to the requesting radio, the radio-user may decide to de-key the radio rather than allow the Time Out Timer to expire. When the Voice Channel access grant is eventually received, the radio plays a Talk Permit Tone and the Quick Key feature causes the radio to begin transmitting silent audio for 3 seconds, even though the PTT button is no longer pressed. If the radio-user presses the PTT button before the Quick Key timer expires, the radio continues transmitting but with an active microphone; otherwise, the radio stops transmitting. |
The Quick Key feature is always enabled for private calls and phone mode. |
When the radio is model / option capable.
This is an advanced
setting which is only
available in Expert View (see Codeplug
View).
